Jeep Wrangler 392 / Mojave / 2026 Rubicon A-Pillar Light Brackets

Jeep Wrangler 392, Gladiator Mojave, White Cap, and 2026 Rubicon A-Pillar Light Brackets

The 2026 Jeep Wrangler Rubicon now uses the raised hood design previously found on the Jeep Wrangler 392 and Jeep Gladiator Mojave. That hood change affects A-pillar light bracket fitment because many standard JL/JT ditch light brackets do not properly clear the taller cowl and hood profile.

These American Adventure Lab A-Pillar Light and Antenna Brackets were specifically engineered for that raised 392/Mojave-style hood. That means they are a proper fit for the Wrangler 392, Gladiator Mojave, White Cap, and the new 2026 Jeep Wrangler Rubicon.

We are one of the few companies offering A-pillar bracket solutions for both Jeep hood styles, so you can choose the correct bracket for your vehicle instead of modifying a part that was designed around the wrong hood.

Built for the Raised 392 / Mojave / 2026 Rubicon Hood

The raised hood used on the Wrangler 392, Gladiator Mojave, White Cap, and 2026 Wrangler Rubicon changes the available clearance near the cowl and A-pillar. Standard JL/JT A-pillar brackets are commonly designed around the lower factory hood profile, which can create fitment problems on these vehicles.

These brackets are designed around the raised hood profile to provide proper clearance, clean alignment, and a durable mounting platform for auxiliary lights and communications antennas.

Vehicle Compatibility

Important: These brackets are specifically designed for the raised 392/Mojave-style hood. If your Jeep has the standard JL/JT hood, this is not the correct version.

Lightweight Without Compromise

Each bracket weighs just 12 oz. per side and is precision-built from corrosion-resistant 5052 aluminum. The result is a strong, lightweight mounting solution that keeps unnecessary weight off your vehicle while still being tough enough for real off-road use.

The raw aluminum finish delivers a clean, functional look and can easily be refreshed with a Scotch-Brite pad if desired.

Clean Exterior Appearance

We intentionally kept the branding subtle and positioned below the side cube mounting area. The goal is a clean, OEM+ appearance that adds function without turning your A-pillar into a billboard.

Designed for Lights and Antennas

These brackets are designed to support both ditch lights and communications antennas. Because pod lights and antenna systems vary significantly between manufacturers, the brackets do not include pre-drilled accessory-specific mounting holes for every possible configuration.

This gives you the flexibility to configure the setup around your specific lights, antenna mounts, and wiring needs.

What’s Included

• Driver-side A-pillar bracket
• Passenger-side A-pillar bracket
• Removable accessory mounting plates
• Zinc-coated installation hardware

The lights used in the photos above are:

• Smaller outboard-facing cubes – Diode Dynamics SSC2
• Large forward-facing cubes – Diode Dynamics SS5

Made in the USA

Every American Adventure Lab bracket is designed, manufactured, and assembled in-house at our facility in St. George, Utah.

We build products for people who actually use their vehicles off-road, with a focus on lightweight construction, clean fitment, functional design, and long-term durability.

When you choose American Adventure Lab, you are supporting American manufacturing and getting parts built by a team that cares deeply about the details.

#InnovationForExploration

To see more highlights of our manufacturing operations, take a peek at our Instagram account.

Lighting and Antenna Mounting Layout

Both the driver-side and passenger-side brackets include the accessory mounting plates shown here. These plates are designed for communications antennas and ditch lights.

There is a cutout in the main bracket below each accessory plate so lighting wires and antenna wires can pass through cleanly. This helps simplify wire routing and keeps the installation cleaner.

The accessory plates bolt to the main bracket and do not have to be installed if they are not needed for your setup.

Antenna Hole Layout

The antenna holes are designed for antennas similar to these:

• Center 9.5mm hole – NMO Antenna
• Two 5.5mm holes – VHF / UHF / HAM Antenna

There are many antenna variations, so please reference the dimensions in the image to verify fitment for your specific antenna.

• The spread between the two 5.5mm holes is 19mm, approximately 3/4″.
• The spread between each of the 8.8mm pod light holes is 25mm, approximately 1″.

Related Product

Our Low Profile Front 18″ LED Light Bar Mount pairs well with these A-Pillar Brackets to create a complete auxiliary lighting setup without putting too much visual focus on the lighting itself.

View Product Page

Product Gallery