Note: Product photos may contain optional components.
Badland Jack Mount – 3 Ton
Price range: $199.00 through $229.00
At approximately 9 lb, our lightweight aluminum mount gives your BADLAND 3-ton off-road jack a dedicated spot without adding much weight to your rig. The formed 3/16-inch 5052 aluminum cradle resists corrosion, and the retainers and brackets keep the jack and both handle sections together. Add an optional padlock for theft deterrence. Available in Raw/Unfinished or Textured Black. Jack sold separately.
Secure checkout with encrypted payment
About powder coat
Powder coat is not an exact paint match. Salt environments, color availability, and match limitations apply. Read finish guidance and suggested colors.
Product Overview
Seat the 3-ton BADLAND jack in the formed cradle and store both handle sections underneath. When choosing a mounting location, leave enough room to pull the retaining pin and reach the handle brackets.
Need an installer? Find one near you
Find an Authorized Installer for your setup.
Choose one installer for your entire order. Your selection follows you between products and is confirmed at checkout.
AAL Product Expert
Product Questions
Ask about installation, fitment, features, or compatibility.
Product Instructions
No product-specific instructions are available for this item. You can browse the Instructions Library for reference. Open the Instructions Library.
A Dedicated Home for Your 3-Ton BADLAND Jack
Designed specifically for the Harbor Freight BADLAND 3-ton off-road jack. This is the 3-ton version of our Badland Jack Mount. For the smaller jack, choose our 1.5-ton mount.
Give your jack a dedicated place in your gear setup. The Badland Jack Mount – 3 Ton combines a formed base, jack retainers, and front and rear handle brackets in one purpose-built assembly.
Choose Raw/Unfinished or Textured Black to suit your build. Jack shown for fitment reference; jack not included.
Built Around the Larger Jack
The 3-ton BADLAND needs its own mount. This version uses a dedicated base and retainer components designed around the larger jack, with separate front and rear brackets for handle storage.
Keeping the mount specific to the jack makes the fitment choice straightforward: match the mount to the capacity and model of the BADLAND off-road jack you carry.
Match Your Jack Before Ordering
This page is for the 3-ton BADLAND off-road jack mount. If you have the 1.5-ton jack, choose our 1.5-ton Badland Jack Mount.
Jack Retention and Handle Storage
The assembly brings together the main base, jack-retainer tabs, a lock-pin assembly, and an Allen-release tab. Front and rear handle brackets provide a dedicated location for the jack handle.
Store both handle sections beneath the jack in the front and rear brackets. The lock-pin assembly secures the jack retainers, while the separate Allen-release tab supports the jack’s tool-retention arrangement. Keep access to these points clear when planning your installation.
Why We Use 3/16-Inch 5052 Aluminum
The main cradle starts as 3/16-inch (0.1875-inch) 5052 aluminum. We form the sides to cradle the jack and give the base its shape, while the separate retainers and brackets keep the jack and both handle sections together.
- Less weight to carry. The BADLAND 3-ton off-road jack (item 59136) weighs 72.2 lb on its own, according to Harbor Freight. That is already a lot of weight to carry in your rig. We form the main cradle from 3/16-inch 5052 aluminum to limit how much the mount adds. Aluminum weighs less than steel for the same volume.
- Corrosion resistance in both finishes. 5052 aluminum forms a protective oxide layer and does not develop the red rust you see on steel. That benefit applies to the aluminum cradle even in the Raw/Unfinished version.
- Formed for the job. 5052 forms cleanly into the bends that give the cradle its shape. Those bends add rigidity and create the sides that locate the jack.
- Two finish options. Choose Raw/Unfinished for exposed aluminum or Textured Black for a powder-coated finish that matches the rest of your setup.
Add an Optional Padlock for Theft Deterrence
The mount accepts an optional padlock at the retaining-pin assembly to help deter removal of the jack. Lock the retaining hardware after seating the jack, then unlock it when you need access.
The padlock is optional. Photos showing a padlock demonstrate the locking arrangement.
Product Details
| Jack Fitment | Harbor Freight BADLAND 3-ton off-road jack. |
|---|---|
| Main Base Material | 5052 aluminum |
| Main Base Thickness | 3/16 inch (0.1875 inch) |
| Handle Storage | Front and rear brackets for the two handle sections |
| Retention Components | Jack-retainer tabs, lock-pin assembly, and Allen-release tab |
| Optional Security | Padlock-compatible retaining assembly |
| Jack Included | No |
Choose Your Finish
| Finish | Part Number |
|---|---|
| Raw/Unfinished | AAL-2205-0 |
| Textured Black | AAL-2205-3 |
Fitment and Installation Planning
Plan space for the jack, its handle, and access to the retainers when choosing a mounting location. Confirm the mounting surface and hardware are appropriate for your setup.
The weight, mounting-hole dimensions, and loading instructions for the 1.5-ton mount do not establish the specifications for this 3-ton version.
Which Badland Jack Mount Do I Need?
Choose this mount for the BADLAND 3-ton off-road jack. If you carry the BADLAND 1.5-ton off-road jack, use the 1.5-ton mount. The two mounts are separate, model-specific products.
More Views of the Uncoated Mount
More Views of the Textured Black Mount
Mount Weight: Approximately 9 lb, including the lock pin and hardware.
Be the first to review “Badland Jack Mount – 3 Ton”
Related products
Overlanding Gear
Cargo Management
Overlanding Gear
MASS Components
Electrical Components
Reviews
There are no reviews yet.