Chris's Silver Jeep Gladiator
Chris’s Gladiator, Organized Around the Bed
Chris’s silver 2020 Jeep Gladiator Rubicon was equipped for daily driving and adventures with his family. The photographed build brings an AAL Load-Bearing Enclosure, bed storage, and exterior mounting surfaces together around the truck’s rear cargo area.
The gallery records installation and equipped configurations. It shows how the enclosure opens, how the slide and drawers extend, and how equipment is carried above the bed. The parts list below preserves the documented setup.
Build Details
Build at a Glance
Vehicle: 2020 Jeep Gladiator Rubicon JT
Powertrain: 3.6L V6, eight-speed automatic
Bed Layout: LBE, rack, drawers, and fridge slide
Photo Record: Installation and completed configurations
Build Story
Enclose the Bed and Keep Rear Access
The Load-Bearing Enclosure covers the upper bed area while retaining an opening panel at the rear. The installation photos show the enclosure both closed and raised, with the drawers and fridge equipment beneath it.
The LBE requires AAL’s Bed Rail Attachment System. Review the current bundle contents and instructions before choosing the rack, MOLLE panels, or other accessories you want to add.
Build Sheet
Extend the Equipment Over the Tailgate
The recorded bed equipment includes an AAL 6-inch storage drawer and fridge slide. The photos show trays extending toward the open tailgate, bringing the cargo into reach.
The original parts list also identifies SetPower RV45D mounting brackets and ROAM cases. Confirm the fridge dimensions, bracket compatibility, slide travel, and ventilation clearance for your own arrangement. Keep space for lids, handles, and drawers to open together.
Build Sheet
Plan the Equipment Above the Enclosure
The documented upper setup includes AAL’s 12-inch bed rack, a bed-rack basket, and a NATO jerry-can mount. Later gallery views show bagged equipment carried above the enclosure and MOLLE mounting surfaces along the sides.
The basket was listed as an upcoming component when the original page was written. Treat it as part of this build’s photo record and ask about current availability rather than assuming that historical listing is an orderable kit.
Choose mounts for the equipment you actually carry and check the applicable rack and vehicle limits for the loaded setup.
Build Story
A Short Walkaround of the Equipped Gladiator
This AAL video provides a visual walkaround of Chris’s build. Compare it with the installation photos to see the equipped vehicle at another stage.
Build Sheet
Recorded Specifications and Equipment
Powertrain
- Engine type: V6
- Displacement: 3.6L
- Horsepower: 285
- Torque: 260 pound-feet
- Transmission: 8-speed automatic
Suspension
Exterior Bed Accessories
- AAL Load Bearing Enclosure (LBE)
- AAL Jeep JT Aluminum Bed Rack 12″ (Half Height)
- AAL JT Bed Rack Basket (historically listed component)
- AAL NATO Jerry Can Mount
Interior Bed
Body
- Metalcloak Flares
- AAL JL/JT Front Inner Fenders
- AAL JT Rear Inner Fenders
- AAL Cowl Accessory Brackets
- 35% Tint on the Front Windows
- 5% Tint on the Rear Windows
Interior Accessories
Understand the Setup
Equipment Layout Guide
Follow the numbered locations to understand this photographed setup.
Enclosed Bed
The load-bearing enclosure provides protected storage above the bed.
Drawer Storage
The right-side drawers organize equipment behind the rear opening.
Slide and Gear Space
The opposite side carries separate storage and working equipment.
This photo explains one configuration, not a complete installation plan. Confirm the current product version, mounting requirements, seating needs, and clearances.
Build Questions
Questions About Chris’s Gladiator
Equipment, fitment, and planning details from this build.
Does the LBE Bundle Include Every Accessory Shown?
Check the selected bundle contents. The gallery shows an equipped truck with storage modules, racks, and other accessories chosen for this build.
What About Rear Passenger Seating?
The recorded interior list includes a rear seat delete and an 86L case. That configuration trades rear seating space for cargo. Include your passenger needs when planning a similar setup.
Are These Photos a Current Parts Package?
They document different installation and equipped stages. Confirm the exact current product versions, mounting hardware, and availability before reproducing the layout.
Can You Help Me Choose a Bed Layout?
Use the questions button above the main photo. Include your model year, fridge dimensions, passenger needs, and the equipment you want to carry in or above the bed.
Still Have Questions About This Build?
Tell us about your vehicle and the setup you want to build.
Your inquiry includes this build page so our team has the context.
Build Equipment
Products Used in This Build
18 productsCompare current product details with the photographed configuration. Versions and included components can differ.
-
Jeep JL/JT Quick-Release Front Inner Fenders
View product -
Jeep Gladiator Quick-Release Rear Inner Fenders
View product -
Milwaukee Packout Mounting Plate
View product -
Jeep JL-JT MOLLE Door Panels
View product -
Jeep JL – JT Overhead MOLLE Shelf
View product -
JL/JT Front Seat Back Molle Panels
View product -
Jeep JL/JT Cowl Accessory Brackets
View product -
SetPower RV45D Refrigerator Mounting Brackets
View product -
Under Seat Mount – ARB Dual Compressor Kit
View product -
BASE 6″ Storage Drawer
View product -
BASE Fridge Slide
View product -
Jeep JT Gladiator Aluminum Bed MOLLE Panels
View product -
JT BASE – Bed Attachment System
View product -
Jeep JT Aluminum Bed Rack 12″ (Half Height)
View product -
Universal Paper Towel Holder
View product -
Jeep Gladiator Load-Bearing Enclosure Bundle
View product -
Jeep JT Gladiator Deluxe Rear Seat Delete Bundle
View product -
Universal NATO Jerry Can Mount
View product


































