2026 Ford F-250 Super Duty Tremor Shop Build
One Shop Truck. Two Jobs.
Our new shop truck is a 2026 Ford F-250 Super Duty Tremor, a Platinum Plus with the H.O. diesel engine. The goal is a full trail and tow build: a truck we can take into the mountains and put to work with a trailer behind it.
We’re at the beginning. The current setup pairs a leveling kit with 37-inch Nitto Ridge Grapplers on 18-inch Raceline Omega wheels. Our Ford BoxLink Fuel Jug Mount Kit is also installed at the bedside. Beyond these additions, the truck is stock.
This page starts with that setup. As the build progresses, we’ll add the parts we choose, why we choose them, and what we learn using the truck.
The Current Setup
- Truck
- 2026 Ford F-250 Super Duty Tremor
- Trim
- Platinum Plus
- Engine
- H.O. diesel
- Suspension
- Leveling kit
- Tires
- 37-inch Nitto Ridge Grapplers
- Wheels
- 18-inch Raceline Omega
- Bedside Storage
- Ford BoxLink Fuel Jug Mount Kit
- Build Stage
- Early build
Build Story
37s and a Leveling Kit
The first changes are straightforward: a leveling kit, 37-inch Nitto Ridge Grappler tires, and 18-inch Omega wheels from Raceline Wheels.
That’s the starting point for our truck, rather than a complete fitment recipe. We’ll add the leveling-kit details and wheel specifications as we document the setup.
Build Story
Bedside Fuel Storage
We have one Ford BoxLink Fuel Jug Mount Kit installed in the F-250. It gives the orange jug a dedicated spot at the bedside, with the mount secured to the factory BoxLink mounting points.
The orange-jug installation photos on the product page were taken in this truck. The kit includes the bedside brackets, jug mount, ratchet strap, and mounting hardware. The jug is supplied separately.
View the BoxLink Fuel Jug Mount Kit
Build Story
The Plan: Trail and Tow
The towing side is already part of the job: hauling our large gooseneck trailer for Ford Raptor Rally. The long-term plan is a full dual-purpose build, with trail use and towing shaping the decisions as it develops.
For now, the future parts list is still taking shape. We’ll document each addition here as it goes on the truck, keeping the installed equipment separate from what’s being considered.
Build Story
Build Log
October 2026: The Starting Point
Platinum Plus, Tremor, and the H.O. diesel. A leveling kit and the 37-inch Nitto Ridge Grappler / 18-inch Raceline Omega combination are installed. The Ford BoxLink Fuel Jug Mount Kit is also installed, holding an orange jug at the bedside. The rest of the truck remains stock. Next comes developing the full trail and tow setup.
Understand the Setup
Equipment Layout Guide
Follow the numbered locations to understand this photographed setup.
Fuel Jug
The orange jug is carried at the bedside; the jug is supplied separately from the mount kit.
BoxLink Mounting Area
The mount uses the factory BoxLink mounting points in this recorded installation.
This photo explains one configuration, not a complete installation plan. Confirm the current product version, mounting requirements, seating needs, and clearances.
Build Questions
Questions About the F-250 Tremor
Equipment, fitment, and planning details from this build.
Which F-250 Is This Build Based On?
The page identifies a 2026 Ford F-250 Super Duty Tremor in Platinum Plus trim with the H.O. diesel engine.
Which Wheel, Tire, and Suspension Changes Are Documented?
The recorded starting setup has a leveling kit, 37-inch Nitto Ridge Grapplers, and 18-inch Raceline Omega wheels. Exact leveling-kit and wheel specifications are not fully documented, so this record is not a complete tire-fitment recipe.
Which Fuel Jug Mount Is Used?
The truck has a Ford BoxLink Fuel Jug Mount Kit at the bedside. The page describes attachment to the factory BoxLink mounting points and identifies the orange jug as supplied separately.
Is the Full Trail and Tow Build Finished?
The page documents the early configuration and the plan for a dual-purpose trail and tow build. Treat future additions as plans until the page records their installation.
Still Have Questions About This Build?
Tell us about your vehicle and the setup you want to build.
Your inquiry includes this build page so our team has the context.
Build Equipment
Products Used in This Build
1 productCompare current product details with the photographed configuration. Versions and included components can differ.
F-250 Tremor Photo Gallery
A closer look at the truck, its current wheel and tire setup, and time out of the shop.
Full-size photos open in the gallery viewer
