Katie's 2025 Toyota 4Runner Build

Heritage Blue, With a Cargo System to Match

Katie’s 2025 Toyota 4Runner TRD Off-Road Premium is a non-hybrid build in Heritage Blue. OME MT64 suspension with upper control arms, Black Rhino Alta wheels, and Nitto Recon Grapplers form the foundation. In back, AAL storage brings together two 6-inch drawers, a fridge slide, and a Mil-Spec MASS Platform.

The rest of the build puts air, auxiliary power, and camp equipment in the same package: an ARB dual compressor and Pressure Control system, two 30Ah lithium batteries, a Dometic fridge, and spare-tire-mounted storage.

Questions About This Build?Browse Toyota 4Runner - 6th Gen Gear

Documented SetupEquipment verification date not recordedPhotos may show different stages. Check current product fitment and included components.

Build Details

Build at a Glance

Vehicle: 2025 Toyota 4Runner TRD Off-Road Premium, non-hybrid
Color: Heritage Blue
Suspension: OME MT64 with upper control arms
Wheels: 17×8 Black Rhino Alta, +32mm offset
Tires: 285/75R17 Nitto Recon Grapplers

Rear view of blue AAL cargo drawers and fridge in Katie's 4Runner

Build Story

Drawers, Fridge, and a Place for the Gear

The 6th Gen 4Runner MASS Platform anchors the cargo setup. Katie’s build uses the Mil-Spec version, paired with 4R6 MASS Platform Accessory Trays and a Mil-Spec Drawer Platform.

Two 6-inch drawers organize the cargo below the upper platform. A fridge slide carries the Dometic CFX3 55L. The gallery shows the drawers and fridge extended at camp, along with earlier configurations of the cargo area.

Planning a similar layout? Compare our 6-inch MASS Drawer and 18×34 Fridge Slide options. Confirm the drawer pattern, fridge dimensions, and mounting arrangement for your setup.

Compressor and air fittings visible through an open MASS Platform access door — Compressor installation beneath the platform during an earlier stage of the build.

Build Story

Onboard Air and Auxiliary Power

An ARB Dual Compressor works with the ARB Pressure Control System and AAL’s 6th Gen 4Runner Air Connection Kit. The installation photos show the compressor and air fittings beneath the MASS Platform.

Auxiliary power comes from two Eco-Worthy 30Ah Lithium Batteries, an AAL Dual 30Ah Battery Bracket, and a Redarc BCDC 1240D.

Storage Beyond the Cargo Area

A Rig’d spare tire swing-out carries the rear-mounted spare. The AAL STP Mini, STP Accessory Brackets, and PACKOUT Adapter with PACKOUT Label round out the exterior storage. A Dual 1lb Propane Tank Mount is also part of the build.

Up top is a Sherpa Capitol roof rack. Diode Dynamics replacement fog lights complete the equipment list.

Understand the Setup

Equipment Layout Guide

Follow the numbered locations to understand this photographed setup.

Photographed cargo layout in Katie's 2025 Toyota 4Runner Build.

Fridge Position
The Dometic fridge sits above the left cargo module.
Drawer Storage
Two blue 6-inch drawers organize equipment beneath the upper platform.
Cargo Foundation
Plan the platform, drawer mounting, and access space as one system.

This photo explains one configuration, not a complete installation plan. Confirm the current product version, mounting requirements, seating needs, and clearances.

Build Questions

Questions About Katie’s 4Runner

Fitment, storage, air, and power details from Katie’s 2025 4Runner.

Which 4Runner Is Katie’s Build?

Katie’s vehicle is a 2025 Toyota 4Runner TRD Off-Road Premium, non-hybrid, in Heritage Blue.

Which Cargo Platform and Drawers Are Used?

The build uses a Mil-Spec MASS Platform, 4R6 accessory trays, two 6-inch drawers, and a fridge slide. The cargo layout also includes a Mil-Spec Drawer Platform.

How Are Onboard Air and Auxiliary Power Set Up?

An ARB Dual Compressor and Pressure Control system handle air. Two Eco-Worthy 30Ah lithium batteries and a REDARC BCDC 1240D are listed in the auxiliary power setup.

Which Fridge Is Recorded in This Build?

The equipment list names a Dometic CFX3 55L. Check your fridge dimensions, lid clearance, and slide fit before planning a similar layout.

Can I Use This Layout in a Hybrid 4Runner?

This build documents the non-hybrid configuration. Check hybrid-specific product fitment and cargo-floor dimensions before choosing components.

What Should I Send When Planning a Similar Build?

Include your model year, trim, hybrid status, fridge dimensions, seating needs, and the gear you want to carry.

Still Have Questions About This Build?

Tell us about your vehicle and the setup you want to build.

Ask About This Build

Your inquiry includes this build page so our team has the context.

Build Equipment

Products Used in This Build

13 products

Compare current product details with the photographed configuration. Versions and included components can differ.

Katie’s 4Runner Build Photo Gallery

From the bare platform and air-system installation to the blue cargo setup at camp, these photos show different stages of Katie’s build. Equipment and finishes vary between photos.

19 photosClick any photo to enlarge