Jeep and Ford Bronco · Compressor Mounts

ARB Compressor Mounts by Vehicle

Give the compressor a dedicated place in the build. AAL offers vehicle-specific mounting options for the Wrangler JKU, Wrangler JL/JLU, Gladiator JT, and Ford Bronco.

Choose your vehicle below, then compare the mounting position and compressor type. Use the product page for current fitment, configuration, and included components.

Find Your Vehicle

Ford Bronco tailgate compressor mount shown installed. Review the selected product for included components and optional accessories.

Start With Your Vehicle

Mounting brackets, connection kits, and complete bundle selections serve different jobs. Check each selection rather than treating every listing as a complete air system.

Wrangler JL / JLU

Seats, Cargo Floor, Tailgate, or Spare Tire

The JL range includes manual-seat under-seat mounting, cargo mounting for the listed gas/diesel applications, a separate 392 single-compressor bracket, TACS tailgate mounting, and an exterior spare-tire option.

Twin ARB Mount: under the front seat.
JL Cargo Mount: below the rear cargo floor.
392 Single-Compressor Mount: in the 392 cargo cubby.
Tailgate Air Command System: inside the tailgate.
Spare Tire Twin-Compressor Mount: behind the spare tire.

Power seats rule out the under-seat mount. The 392 cargo bracket holds a single compressor or a battery, not both.

Compare JL Mounting Locations

Wrangler JKU

Use the Rear Cargo Cubby

The JKU cargo mount uses the space below the rear cargo floor for compressor and optional auxiliary-battery components. Review the installation instructions for cubby-liner removal, drilling, and the selected battery bracket.

View JKU Cargo Compressor and Battery Mount

This listing is for the four-door JKU. Do not assume it fits a two-door JK.

Gladiator JT

Cab or Bed Mounting

Choose a mounting position around how the Gladiator carries passengers and gear.

Behind the rear seat: a twin-compressor mount with an optional connection kit.
In the bed on the OEM Trail Rails: a twin-compressor bracket with a removable cover and included coupler connections.
Under a manual front seat: choose the correct side-specific connection components.

Rear-Seat Operating Requirement

The Gladiator rear-seat mount’s instructions require the rear seat to remain folded down while the compressor runs and until it cools to a safe, touchable temperature.

Ford Bronco

Tailgate or Cargo-Area Mounting

Tailgate compressor mount bundle: a single-compressor installation inside the tailgate. The current modified-harness arrangement is for the hardtop; soft-top installations need additional review.
Rear twin-compressor mount, driver side or passenger side: select the correct side and confirm vehicle fitment. Both current listings state compatibility with the ARB twin brushless compressor.
Cargo Floor Multi-Mount: an alternative for a single ARB compressor and selected battery components in a two- or four-door Bronco.

Roof and interior configurations affect the available space. Confirm your exact setup before selecting the mount and wiring components.

Check These Three Things Before Ordering

Vehicle and Position

Match the model, body style, engine, seat type, and mounting location to the listing. Check clearance around existing cargo and tailgate equipment.

Compressor Model

Match single or twin, brushed or brushless, to the mount’s stated compatibility. Do not extend one product’s fitment claim to every bracket.

Selected Components

Review the included-items list and bundle options for wiring, hoses, couplers, switches, and the compressor itself.

Need help narrowing it down? Send AAL your vehicle and compressor details, along with photos of the intended mounting location.