New

Textured-black Ford BoxLink Fuel Jug Mount Kit with ratchet strap installed on a Ford F-150 bedside

Wide view of the Ford BoxLink Fuel Jug Mount Kit installed beside the Ford pickup wheel well

Ford BoxLink Fuel Jug Mount Kit installed at the bedside through the clearance hole in an AAL MOLLE panel

Ford BoxLink Fuel Jug Mount Kit

Fitment: Ford F-150 (2015–2020)Ford F-250 Super Duty (2017–2026)Ford F-350 Super Duty (2017–2026)Ford F-450 Super Duty (2017–2026)Ford F150 (2021+)

Price range: $130.00 through $185.00

Give your fuel jug a dedicated spot inside your Ford pickup bed. The Ford BoxLink Fuel Jug Mount Kit bolts directly to the bedside holes provided for the BoxLink system. Factory BoxLink brackets, plates, and cleats are not required. Holds your 10-inch jug with the included ratchet strap and Cordura sleeve. Fuel jug not included.

Note: Product photos may contain optional components.

AAL Installer NetworkFind an Authorized Installer

Finish

Clear

Frequently Purchased Together

5 Gallon Tuff Jug

$45.99

Tuff Jug Spout Adapter

$12.79

Secure Checkout - TLS Protected by Cloudflare

Ordering powder coated? Read this first. Powder coat is not an exact paint match. Salt environments, color availability, and match limitations apply. Click to read more and see suggested powder coat colors.

SKU: N/A Category: Cargo Management Brand: American Adventure Lab

Description
Reviews (0)

Ford BoxLink Fuel Jug Mount Kit

An Easy Way to Secure Extra Fuel in Your Ford Pickup

A dedicated jug holder, bedside mounting brackets, and a protective strap sleeve give your extra fuel its own place in the bed.

Whether you’re hauling fuel for powersports, heading off-road, or planning a long trip, keep your extra fuel secured in a purpose-built holder.

Built on a Design We Keep Refining

This kit uses our existing 10-inch Fuel Jug Mount, a design we’ve refined through repeated updates. This kit pairs that refined jug holder with brackets made for your Ford bedside.

Aluminum Where It Holds the Jug. Steel Where It Meets the Truck.

5052 aluminum jug holder: The 10-inch Fuel Jug Mount uses 3 mm 5052 aluminum for low weight and corrosion resistance.
1018 cold-rolled steel bedside brackets: Our steel bedside brackets bolt directly to the factory holes provided for the BoxLink system.
Cordura sleeve: The sleeve helps protect the ratchet strap and your fuel jug from chafing.
Flexible ratchet placement: Position the ratchet on either side of the jug holder to suit your installation.

Made in the USA. Built in St. George, Utah.

We make the fuel jug mount and bedside mounting brackets right here in our St. George, Utah shop. American-made parts, straight from our shop to your Ford pickup.

Ford Bedside Fitment

Fits All Four Factory BoxLink Locations

Install at the front or rear of the bed on either the driver or passenger side. One kit mounts one fuel jug at your chosen location. Requires a factory pickup bed with the mounting holes provided for the BoxLink system. Factory BoxLink attachment brackets, interface plates, and cleats are not required. Trucks without factory BoxLink hardware can use this kit as long as those holes are present. Confirm the holes are present before ordering.

Ford Pickup	Model Years
F-150, Including Raptor	2015–2026
F-250, F-350, and F-450 Super Duty	2017–2026

Chassis-cab and aftermarket bed fitment is not covered.

Direct Bedside Mounting, With or Without an AAL MOLLE Panel

Directly to the Ford Bedside

The included AAL bedside brackets bolt directly to the holes in the bedside provided for the BoxLink system. No factory BoxLink attachment brackets, interface plates, or cleats are required. If factory hardware is installed at your chosen location, remove it and install the included AAL brackets in its place. No BoxLink plate conversion kit is needed for the H-Loop tie-down style. Check clearance around bedliners, electrical outlets, tonneau hardware, and other accessories.

Textured-black F15-1028 fuel jug mount installed directly on a Ford pickup bedside — Direct bedside installation with the textured-black kit. Fuel jug not included.

Through an AAL MOLLE Panel

Our compatible Ford bedside MOLLE panels include a clearance hole for this mount. The mount fastens through that opening directly to the bedside holes provided for the BoxLink system behind the panel. Choose the AAL panel made for your vehicle. Panels are sold separately.

Textured-black fuel jug mount installed at the Ford bedside with an AAL MOLLE panel in place — Installed with an AAL MOLLE panel. The mount fastens through the panel’s clearance hole directly to the bedside holes provided for the BoxLink system. Panel and fuel jug sold separately.

What Comes in the Kit

Bedside mounting set (F15-1026): bedside mounting brackets and hardware for installation on either the driver or passenger side.
10-inch Fuel Jug Mount (AAL-1390): jug holder and assembly hardware.
Retention strap: 1-inch × 6-foot ratchet strap with Cordura sleeve, tri-glide buckle, and red silicone band. Trim the ratchet strap and Cordura sleeve to fit your specific fuel jug.

Bring your own jug. Fuel jug and MOLLE panel are not included. Installation photos show the textured-black finish. Fuel Container Use: Use an approved fuel container and follow its transport instructions.

Reviews

There are no reviews yet.