Jeep Wrangler JL/JT Gladiator A-Pillar Light and Antenna Brackets

*Comes in a Pair*

Introducing the Ultimate A-Pillar Brackets for the Ultimate Off Road Machines! 🚙 Super Light and Strong! Our brackets are like that elusive six-pack you’ve been working on for years – strong and lightweight! Weighing in at a mere 12 oz. per side, these brackets are built from 5052 aluminum, so they’re tough enough to handle the trails while staying as corrosion-resistant as your best dad jokes. No need to slap on a fresh coat of paint – these babies rock the “raw” look effortlessly, and all it takes to keep them looking sharp is a little 3M Scotch-Brite buffing. Just like maintaining that rugged, “race car look” of yours – easy peasy! Classy and Low-Key Logo Placement We get it, guys. You don’t want to be a walking billboard. That’s why we tucked our logos away below the side cubes, so you can keep things classy. No giant logos here to steal the show, just like how you prefer to blend into the background at your cousin’s fancy dinner parties. 🤣 A Couple of Friendly Warnings First, these brackets are made for the Jeep JL and Gladiator, slightly different than the 392/Mojave version. Second, we didn’t cut holes for your ditch light pods. Why, you ask? Well, because there are about a gazillion different pod lights out there, and we couldn’t possibly predict where you’d want them. We’ll leave the hole-poking to you – it’s a manly task, after all! Third, these come with zinc-coated hardware. So, if you want your rig to look as tough as it performs, these brackets are the answer. Get yours today, and hit the trails with confidence and style!👍 The lights used in the photos above are:

• Smaller cubes pointed outboard – Diode Dynamics SSC2
• Large forward-facing cubes – Diode Dynamics SS5

To see more highlights of our manufacturing operations, take a peak at our Instagram Account.

Made in the USA!

When you choose our products, you’re not just enhancing your ride – you’re igniting the spark of American innovation and craftsmanship. We are immensely proud to share that each and every component is meticulously designed, crafted, and brought to life right here in the heart of the USA, our very own shop in St. George, UT. This isn’t just about the brackets; it’s about embracing a legacy of quality, ingenuity, and unwavering pride in American manufacturing. With us, you’re not just buying a product – you’re investing in a piece of American excellence, fueled by a dedication to innovation that’s as bold as the landscapes you’ll conquer with our accessories. Stand tall and ride with unparalleled confidence, knowing that your choice supports the true spirit of American craftsmanship. Discover the power of pride in every piece we create. Experience the difference of American-made perfection – choose us today.

Hole Layout

Both the driver’s side and the passenger’s side brackets include the accessory brackets you see here. They are designed for comm’s antennas and ditch lights. There is a cutout in the main bracket below each accessory bracket for lighting wires and antenna wires to pass through making routing your wiring a much cleaner process. The brackets are bolt-on to the main bracket so they do not have to be installed. The antenna holes are designed for antennas similar to these:

• For the center 9.5mm hole – NMO Antenna
• Two 5.5mm holes – VHF/UHF/HAM Antenna

There are a lot of different variants of those antennas, so please reference the dimensions in the photo to the right to verify fitment for your particular antenna. The spread between the two 5.5mm holes is 19mm (~3/4″) The spread between each of the 8.8mm pod light holes is 25mm (~1″).

Semi-Custom Name Plate

We have been wanting to offer some semi-custom parts. This *may* be a good one to begin that process with. If you would be interested in this option, please reach out to us, message us on Live-Chat here on the site or message us on Instagram. Depending on what you want on the nameplate, it could be very easy or very hard. We’ll need to evaluate this as an option as the product matures a little. We could also do a similar custom name plate above the accessory bracket so you could retain full functionality of the brackets. I would like to see how this goes and build a few sets of these. Then, we’ll re-evaluate if we can do this cost effectively for the long run.

Related Product

Our new Low Profile front 18″ LED Light Bar Mount pairs up very well with these A-Pillar Brackets to provide a well rounded auxiliary lighting system without putting an abundance of visual focus on your LED lighting. View Product Page

Product Gallery