Sumner’s Down Under JK
Sumner’s JK, From the Cargo Floor to the Overhead Panels
Sumner’s Down Under JK is a red, four-door Jeep Wrangler with a distinctive zebra-striped exterior. Its photo record follows the interior installation: cargo platforms behind the front seats, a fridge at the rear opening, a battery mounted beside the cargo area, and overhead equipment within the cabin.
The installation stages make this a useful reference for planning the space around your own gear. Look at the mounting surfaces, access paths, and equipment clearances together before choosing a similar combination.
Vehicle: Four-door Jeep Wrangler JK
Photo Record: Cargo and cabin installation stages
Rear Layout: Fridge, cargo platform, and tailgate surface
Start With the Space Behind the Front Seats
The photos show metal platforms fitted behind the front seats and across the rear cargo area. Other views show the same space before those panels were installed, making the mounting locations and available floor area easier to compare.
Decide how much rear passenger seating you need before planning this kind of cargo arrangement. A platform changes how the space is used; check the exact vehicle, seat configuration, mounting hardware, and access to equipment beneath the panels.
Platform installation behind the front seats, viewed through a rear door.
The fridge and adjacent cargo platform beside the open tailgate.
Check the Fridge With the Tailgate Open
The rear views show a fridge positioned on the left side of the cargo area, with a metal platform beside it and a separate work surface on the open tailgate. The gallery records several stages rather than one fixed, finished layout.
Measure the fridge including its handles and check the lid’s open position. Leave the ventilation space specified by its manufacturer, and consider where you will stand to reach the fridge and use the tailgate surface. The source page does not identify the fridge model or slide dimensions.
Plan Battery Mounting and Service Access
A green-topped battery is mounted beside the rear cargo space on a dedicated bracket. The installation photos show its location relative to the body, rear opening, and surrounding equipment.
Plan secure mounting, protected wiring, circuit protection, and access for inspection together. These photos establish the mounting location, but they do not document the complete charging system, battery capacity, or how long it powers the fridge.
The battery mounted beside the rear cargo area during installation.
Overhead panels and equipment viewed from the rear of the cabin.
Use the Overhead Space With Clearance in Mind
The cabin photos show overhead panels and a mounted radio control or display above the windshield area. Additional views show lighting and equipment around the interior.
Check head clearance, visibility, cable routing, and access to controls when planning overhead storage or communications equipment. Confirm that the selected panels and mounts suit your roof and vehicle configuration.
Questions About Sumner’s Wrangler JK Layout
Is This a Two-Door or Four-Door JK?
The photos show a four-door Wrangler JK, commonly called a JKU. Its model year is not documented on the original page.
Do These Photos Show the Final Configuration?
The gallery includes multiple installation stages. Use it as a layout reference and confirm the exact components before reproducing a setup.
Which Fridge and Battery Are Installed?
The original page does not provide model or capacity specifications. Ask AAL about your own equipment dimensions and electrical requirements rather than choosing from appearance alone.
What Should I Include When Asking About a Similar Build?
Use the questions button above the main photo. Include your Wrangler’s year, door count, seating needs, fridge dimensions, and the equipment you want to carry.
Sumner’s Down Under JK Photo Gallery
