This product utilizes the stock fender flares and does not include additional fenders or flares. These are not designed for the JL Sport or Sport S that has the 1 piece fender design. Those would require them to be custom cut to fit our lights. We have not attempted to custom fit our braces and lights to a sport fender yet. We do plan to attempted this in then near future.
Sequential Turn Signal Pattern
I can’t begin to express my gratitude enough to those of you who pre-ordered these lights. It definitely took longer than I expected to get these to the market, but you stuck by, and for that I’m very grateful.
NOTE: pricing is for the pair (one bracket for each side)
Optional RGB LED
Want to stand out at events, car shows, etc? What better way than to color match your daytime running lights and/or turn signals. Our RGB LED light comes with a wireless remote control and allows you to select from 8 colors and 7 patterns.
NOTE: The RGB white has a blue’ish tint to it. This is due to the RGB bulbs creating a composite white. If you want pure white, we suggest the non-RGB versino.
Here’s the Back Story
On October 5th, while Trail Hero was here in town, I loaded up the JL with a sawsall, cordless cuttoff disc, flap disc, hammers, and more. I left out headed straight for the Metalcloak CTI trailer with intentions of staying on the trailer until I removed or “massaged” everything that got in the way of complete articulation. There’s some cool video of this on the Modern Jeeper Instagram page.
Luckily, the only parts that had to be removed were the inner fender liners on the front and back. Thankfully, I was able to keep the sawsall safely tucked away in the rear storage drawers.
The unique look of the Jeep JL is definitely the horizontal lights on the fenders. This is what separates its look from previous generations of Wranglers. Unfortunately, when the inner fender and fender trim is removed, so is the mounting system for the OEM daytime running light.
That’s no good! We can fix that.
The Idea Was Born
After I got back to the shop, made measurements, and ran a few ideas through my head, I knew exactly what I wanted. It took a couple of days for my test LED strips to come in, but once they got here, my Dad and I threw together the first prototype bracket and DRL on October 11th.
I drove the JL in one-eyed mode like this for about a month as I was drawing up the bracket design.
NOTE: The standard pattern shown in this video was used for our very first mockup. All of our High-Lines ship with the sequential turn signal pattern.
Prototype boneyard, and a random octopus
After many, many sleepless nights, probably a thousand hours in Solidworks, and miles of 3D printer filament, I finally have a version of the fender bracket ready to ship.
At this point, everything is made in the USA with the exception of the LED strip. I would love to source that domestically, but we have been unable to find a supplier for that. If you have any leads, please let me know. I would definitely take less margin on this (keep price the same within reason) to make it 100% in the USA.
We use the matching OEM connector so that the install is an easy plug and play process. No splicing required.
We wire both DRL circuits to our white DRL light.
Stock, our lights will cause a turn signal out warning when you first start your Jeep. The latest Tazer JL firmware is able to prevent this warning. Here are the instructions that must be followed explicitly – https://www.instagram.com/p/BwK2Y76DhBA/.
If you would like to eliminate the Bulb Out Warning without needing a Tazer JL, you can purchase our Bulb Out Fix harness. This inline harness will prevent the Bulb Out Warning completely.
Our housings are injection molded for extreme precision and durability. The lens is UV stable for extended life.
The bracket is cut on fiber laser from 11 ga steel and powder coated satin black for corrosion prevention.
We use stainless steel assembly hardware combined with black mounting hardware.
Yes, you can use your stock inner fenders.
We ran into the gang from Trail Jeeps while bouncing around the rocks in Moab. They had our High-Line fender brackets and lights installed on their JL. They also used the stock inner fender and did a great job of making it look close to original.
Learn more about TrailJeeps here – http://www.trailjeeps.com/
Huge thanks to everyone who have already sent in photos! We really appreciate it. To have your photos added, please send them to us via email – Go@AmericanAdventureLab.com.