On-board air is an absolute necessity for a properly equipped off road vehicle. The engineers at Jeep unknowingly created the perfect location to store a dual ARB compressor. The space beneath the floor of the rear cargo area in the new Jeep JLU provides a dry, secure, and sound deadened space to store your compressor. Our Jeep JL Compressor Relocation Bracket provides the structure to safely secure your compressor in this location.
Improving on the already convenient location of the compressor, our remote kit brings all of the functionality of your compressor to an easy to reach location just behind the driver c-pillar at the rear of the cargo area. Neatly tucked out of the way of damage, the remote bracket houses both filters allowing the compressor to bring in fresh cool air which keeps the compressor running efficiently. We also include a quick-release ARB hose coupler. If you have ever used one of these couplers, you know these are the absolute best couplers on the planet. The switch for the compressor is also mounted into the remote bracket, putting everything you need access to for your onboard air needs in one location.
NOTE: The photos show the filters and switch from the ARB Dual Compressor Kit. Those are not included in this product; they come with the compressor.
Important Powder Coating Note
Powder coating is a manual process done by humans. When you purchase powder coated products from AAL, we coat them for your order. Occasionally, that means delays with non-standard colors, resprays for less-than-perfect conditions, etc. We have a very high standard with powder coated products. We will work to get your parts coated in the best condition possible before they leave the building.
Please visit our Powder Coating Page for colors that resemble OEM Jeep JL paint colors.
In-Depth Install by Four Wheeler
Sean Holman, of Four Wheeler, did a very thorough installation of the JL version of this product – complete compressor, auxiliary battery, and remote kit package. He did a great job of explaining the benefits of this system as well as the steps required to get it all connected. Check it out if you have a few minutes. It’s a very educational read.
Take Me to the Install article
Maximum Space Efficiency
In an effort to give you as much integration possible with the charging components and auxiliary battery, we have added a new option for our remote bracket. The new option adds a built-in voltmeter and remote status LED for the REDARC BCDC 1225. That makes adding these new components a no-drill install and puts everything is one convenient, out of the way, location. The voltmeter is inactive until the momentary red switch button is pressed. This preserves every ounce of electricity. The status LED is wired directly to the REDARC BCDC 1225 as per REDARC’s instructions. We sweat the details so you don’t have to.
Integrated 6-Way Fuse Box (Optional)
But wait, there’s more!!! (said in my best Billy Mays voice) We also have an optional auxiliary fuse box that can be mounted to the remote bracket. If you are also using our Odyssey PC1100 battery mount, this auxiliary fuse box will be very handy, allowing you to wire in several accessories in one convenient location.
Vertical 12V Receptacle
But wait, there’s more more!!! Also built into the remote bracket is a 12V receptacle mounted vertically. This receptacle is intended for those long fridge cords that protrude into the cargo compartment when they are plugged into the OEM rear auxiliary port. By mounting it vertically, the long end of the cord is not in the way of the cargo area.
The kit ships with the following:
- Aluminum bracket
- ARB quick coupler
- ARB braided steel high pressure hose
- (2) Sections of MettleAir flexible air hose
- (2) Bulkhead fittings for filters
- (1) Bulkhead fitting for coupler
- (4) Brass 90 degree fittings
- (4) Straight push-lock fittings
- (1) Voltmeter
- (1) Voltmeter switch
- (1) REDARC status LED