Harbor Freight Item 70887
1.5-Ton BADLAND Jack Mount
Fits the BADLAND 1.5-Ton Off-Road Jack. Offset, cushioned supports keep both handle halves under the jack. A separate cradle holds the Allen wrench.
Shop 1.5-Ton āRecovery Gear / Jack Storage
BADLAND
Jack Mounts
Give your Harbor Freight BADLAND off-road jack and both handle sections a dedicated spot in your rig. Choose the mount made for your 1.5-ton or 3-ton jack.
Compare fitment āMounts sold separately from the jacks.
01 / Model Fitment
Which BADLAND Jack Do You Carry?
Check the capacity and item number on your jack before you order. Each mount fits one model.
Harbor Freight Item 59136
3-Ton BADLAND Jack Mount
Fits the BADLAND 3-Ton Off-Road Jack. A formed 3/16-inch 5052 aluminum base cradles the larger jack. Front and rear brackets hold both handle sections beneath it.
Shop 3-Ton ā02 / Installation Planning
Make Room to Get the Jack Out
Mock up the location with your usual cargo loaded. Leave room to reach the pin and retainers and lift the jack clear. Getting to the jack shouldnāt be the first recovery job.
Read the 1.5-ton mounting guide ā- 1.5-Ton Mounting Pattern
- 7 mm holes accept 1/4-20 or M6 bolts. Adjacent holes are 6 inches apart lengthwise and 3 inches across, center to center. Choose hardware for your mounting surface.
- 3-Ton Installation Planning
- The mount weighs approximately 9 lb with its lock pin and hardware. Check clearance and choose a mounting surface and fasteners suitable for the combined weight of the jack and mount.
03 / Common Questions
BADLAND Jack Mount FAQs
Are the 1.5-ton and 3-ton BADLAND mounts interchangeable?
No. Choose the 1.5-ton mount for Harbor Freight item 70887 and the 3-ton mount for item 59136. Each mount uses a cradle and retainers shaped for its jack.
Can I lock the jack in the mount?
Both mounts accept an optional padlock at the retention assembly to help deter theft. Check the product page for the locking arrangement on your model.
Where do the jack handles go?
Both handle sections store beneath the jack on either mount. On the 1.5-ton mount, place the foam-covered handle half above the rectangular cutout.
Does the mount come with a jack?
The American Adventure Lab product is the mount. Purchase the compatible BADLAND off-road jack separately.
