This is the small anchor point you reach for when your L-Track needs one more clean strap location.
The Single Stud Tie Down Ring – Black is a removable single-stud L-Track fitting for cargo areas, trailers, vans, truck beds, and shop fixtures. Press the spring-loaded plunger, drop the fitting into a standard airline-style L-Track slot, and use the swiveling ring as a tie down point for straps, rope, or bungees.
Use it for coolers, fridge slides, cargo boxes, tool bags, compressor cases, recovery gear, and the loose parts that tend to move around when the road gets rough.
Why This Version
Compared with our natural-finish L-Track connector, this black version is slightly larger and uses a larger-diameter plunger. That gives the fitting more contact under the track lip and a more positive lock when it is seated in the rail.
Press the plunger, seat the stud in the L-Track slot, and release it into position.
Route straps from the angle that works for your cooler, tool bag, box, or case.
Blends with black track and hardware without making the cargo area look pieced together.
Best Fit
This fitting belongs in standard L-Track based cargo systems, including AAL L-Track bed kits, BASE systems, and other modular builds that need movable tie-down points instead of permanent brackets everywhere.
Keep a few extras in a drawer, pouch, glove box, or door pocket. A couple of movable anchor points can make a big difference when the loadout changes from trail tools to camp gear to shop supply runs.
How It Locks Into L-Track
Push down on the spring-loaded plunger, drop the stud into the L-Track keyhole, slide it into position, and release. The stud locks under the lips of the track and gives you a movable tie down point wherever the rail allows it.
When your loadout changes, press the plunger again, slide the fitting back to the keyhole, and lift it out. No permanent bracket. No tools. Just a simple anchor point you can move as the cargo changes.
Common Questions
What is a single stud tie down ring?
A single stud tie down ring is a removable cargo anchor that locks into one slot in an L-Track rail. This version has a swiveling ring on top, so you can connect a strap, rope, or bungee from different angles.
Will it fit standard L-Track?
It is designed for standard single-stud L-Track, often called airline-style track. Always confirm your rail accepts single-stud fittings and follow the working load limits for your track, straps, and hardware.
Is this the same as a single bolt tie down ring?
No. Search results often group these parts together, but this is a removable single-stud L-Track tie down ring. It does not bolt permanently to the floor. It locks into an existing L-Track rail and can be moved or removed without tools.
What can I secure with it?
It works well for everyday cargo control: coolers, fridge slides, storage boxes, tool bags, compressor cases, and recovery gear. Use multiple rings when a load needs more than one strap angle.
Specs
- Type: Single-stud L-Track tie down ring
- Interface: Standard L-Track slot pattern, also known as airline-style track
- Ring style: Round swiveling tie down ring
- Finish: Black
- Brand: EMC
- SKU: AAL-1336
Always follow the working load limits for the track, fitting, straps, and mounting surface. Your tie-down setup is only as strong as its lowest-rated component.
Included
- One Single Stud Tie Down Ring – Black
Grab several if you want tie-down points staged for different loadouts. A few movable anchors make it easier to secure odd-shaped gear without turning the cargo area into a pile of loose straps and hooks.









Reviews
There are no reviews yet.