$169.95
Everything you need to run 1LB propane on your rig — in one box. The Dual 1LB Propane Tank Mount ships fully assembled with two Ignik Pounder refillable cylinders already loaded and orange edge molding pre-installed. Mount it, head to your local propane fill station, and you’re set. No sourcing parts. No guessing if bottles fit. Just a complete, trail-ready propane setup from day one.
Note: Product photos may contain optional components.
The Dual 1LB Propane Kit is a complete, trail-ready propane setup in a single part number. One Dual 1LB Propane Tank Mount in Textured Black, two Ignik Pounder refillable cylinders, and orange edge molding – fully assembled and ready to install. The mount is laser-cut from 5052 aluminum, powder-coated in-house, and built around the Ignik Pounder from the start. The cylinders are DOT and UL certified, refillable at any standard propane fill station, and engineered to stay on your rig – not end up in a landfill. Whether you’re bolting it to a Spare Tire Platform, a MOLLE panel, or dropping it into a drawer, this kit gets you up and running without the guesswork.
The Dual 1LB Propane Kit ships fully assembled – two Ignik Pounder refillable cylinders already loaded in the Textured Black Dual 1LB Propane Tank Mount, edge molding installed. Stop at your local propane fill station, get both bottles filled, and go.
One part number. No hunting for compatible pieces. Just open and install.
Textured Black powder coat. Patent-pending reversible swing-arm design. Laser-cut 5052 aluminum. Made in the USA.
DOT and UL certified refillable 1LB propane cylinders. Screen-printed markings. Flat-blade fill valve. Dark blue finish.
Pre-installed on the mount. Protects the finish on your cylinders where they contact the mount – the kind of detail that separates a real product from a bracket.
No assembly. No sourcing parts. No guessing if bottles fit.
Mount arrives assembled. Both Ignik Pounder cylinders are loaded in the mount. Edge molding is in place. It’s ready to bolt up or set into your storage system.
The same place you fill your BBQ tank. You will need a 20lb to 1lb propane adapter to connect the fill hose to your Ignik Pounder – available on Amazon or at most propane supply stores. The station fills the bottles the same way they fill any other cylinder.
Two full Pounder cylinders give you roughly two weeks of daily trail cooking. Run one completely dry using the indicator arrow, then tap the second. No half-used cans rattling around.
The Dual 1LB Propane Tank Mount is the only swing-arm dual-bottle mount of its kind. The sideways sheet metal cutout design and reversible swing direction are patent pending – you won’t find this anywhere else.
The orange edge molding you see on the bottom of the cylinders (updated photos coming soon) is included with every kit. It’s a small detail, but it’s the right one: no metal-on-metal contact, no finish damage on your Ignik bottles or Dual 1LB Propane Tank Mount, no rattles.
Made in the USA. Patent Pending.
View Mount PageMost 1LB cylinders are built to be thrown away. The Ignik Pounder is built to stay on your rig. These are the bottles we designed the mount around – and they’re the only ones we include in this kit.
Two full Pounders weigh roughly 4 lbs total. A single 5LB tank weighs around 15 lbs. When you’re managing weight on a build, the difference matters.
View Ignik Pounder Page
| Component | Specification |
|---|---|
| Included Components | 1x Dual 1LB Propane Tank Mount (Textured Black), 2x Ignik Pounder 1LB Refillable Cylinders, Orange Edge Molding (pre-installed), All Mounting Hardware |
| Mount Material | 5052 Aluminum, Laser-Cut, Textured Black Powder Coat |
| Mount Dimensions | 10.5" (266mm) W × 8.15" (207mm) H × 5" (128mm) D |
| Mount Weight | 3.2 lbs |
| Cylinder Capacity | 15.5 oz (1 LB) per cylinder – 31 oz total |
| Cylinder Dimensions | 3.8" × 3.8" × 8.7" each |
| Cylinder Weight (Empty) | 1.7 lbs each / 3.4 lbs pair |
| Cylinder Certification | DOT & UL Certified |
| Fill Method | Standard propane fill station – flat-blade screwdriver bleeder valve |
| Mounting Options | Vertical panel, floor, platform, AAL Spare Tire Platform, MOLLE Bed Panels |
| Appliance Compatibility | All standard 1LB propane appliances – stoves, heaters, lanterns, grills |
| Ship Condition | Fully assembled – cylinders loaded in mount, edge molding installed |
| Mount Origin | Made in the USA (Patent Pending) |
The kit mounts to vertical panels, floors, and platform systems. Pre-drilled for direct bolt-up to AAL Spare Tire Platforms and MOLLE Bed Panels. Works just as well dropped into a drawer or tote without mounting.
Off-Road Vehicles
Overland Rigs
UTVs
Expedition Trailers
Safety: Store and transport cylinders upright, secured, and away from heat sources and sharp objects. Refill at a professional propane station using the bleeder valve. Do not attempt to refill by inverting a larger tank. Keep away from open flame during filling.
The kit includes one Dual 1LB Propane Tank Mount in Textured Black, two Ignik Pounder 1LB refillable propane cylinders, orange edge molding pre-installed on the mount, and all mounting hardware. It ships fully assembled with the cylinders already loaded in the mount.
Any standard propane fill station – the same place you fill your BBQ or camp stove tank. The Ignik Pounder uses a flat-blade bleeder valve that station attendants are familiar with. No specialty equipment, no inverting a larger tank at home. Just pull up and fill.
A single 1LB cylinder typically lasts over a week of daily trail cooking. Two cylinders double that range – roughly two weeks of daily use – while also giving you a backup if one runs low unexpectedly. The mount’s indicator arrow lets you track which cylinder is active so you run each one completely dry before switching.
The Ignik Pounder is compatible with all standard 1LB propane appliances – camp stoves, portable heaters, lanterns, small grills, and griddles. It uses the same standard valve connection as Coleman disposable cylinders.
Yes. The Dual 1LB Propane Tank Mount is reversible – the swing arm can be configured to open left or right depending on your vehicle layout and mounting position.
No. The kit ships ready: mount assembled, cylinders loaded, edge molding installed. The only step before using it is getting the Ignik cylinders filled at your local propane fill station.
The orange edge molding lines the bottom of the cylinder slots on the mount. It prevents metal-on-metal contact between the aluminum mount and the Ignik cylinder finish, eliminates rattling, and protects both surfaces over time. It’s pre-installed – you won’t need to add it yourself.
Yes. The Ignik Pounder is DOT and UL certified, making it legal for transport in your vehicle and compliant with safety standards for use across any rig, trailer, or overland build.
The mount is pre-drilled for direct attachment to AAL Spare Tire Platforms and MOLLE Bed Panels. It also bolts to vertical panels, floors, and platform systems. When not permanently mounted, it can sit in a drawer or tote and keep bottles from rolling and shifting while driving.
Yes. The Dual 1LB Propane Tank Mount is designed, laser-cut, and powder-coated in-house in the United States by American Adventure Lab. The Ignik Pounder cylinders are manufactured by Ignik and are DOT and UL certified.
Electrical Components
MASS Components
MASS Components
Overlanding Gear
Cargo Management
Reviews
There are no reviews yet.